I'm hoping someone can steer me in the right direction. I'm looking at purchasing a Big Gold (styled after the one used by the WWE) Can any one provide me with information on which beltmaker produces the best version of this belt?
Thanks.
Info needed
Forum rules
ALL NEW PEOPLE
Your first post MUST be a dedicated NEW Introduction Topic.
Tell us about yourself, your history with belts and what brings you here.
ALL NEW PEOPLE
Your first post MUST be a dedicated NEW Introduction Topic.
Tell us about yourself, your history with belts and what brings you here.
- BeltFanDan
- Belt Maker
- Posts: 3371
- Joined: Thu Aug 25, 2016 2:29 pm
- 7
- Location: New York
- Been thanked: 6 times
- Contact:
Re: Info needed
This should be in the real belt section.
WWE version was original a 3c CNC version by Jmar which if you can find go around $8,500. Cast copies of those were made which go around $6,500.
Dave Millican casted the J-Mar cast and made those for WWE from around 2009 until they stopped using the belt. Copies of them were never available to the public.
There are people who make 2d etched versions for <$2,500 which come close.
I for example, have several for sale if you see my post in the B/S/T section.
WWE version was original a 3c CNC version by Jmar which if you can find go around $8,500. Cast copies of those were made which go around $6,500.
Dave Millican casted the J-Mar cast and made those for WWE from around 2009 until they stopped using the belt. Copies of them were never available to the public.
There are people who make 2d etched versions for <$2,500 which come close.
I for example, have several for sale if you see my post in the B/S/T section.